Urethane Belt Welding Kit

Urethane Belt Welding kit – Round Belt Welding Kit

Polyurethane Belt Welding kits can weld most polyurethane round and v-belts, which is included: 220V/110V electric soldering iron, clamp, scissor etc.

• 220 volt soldering iron, Pre-set weld temperature @450° – 475° F, temperature may be increased by shortening stem length.
• welding silver clamp – suitable for diameter 6-20mm round belt and A.B.C type v-belt. and T-profiles Belt (width 30mm and high 12mm).
• Anti-Skid scissors.  cut two ends of belt with plane and smooth, which can make polyurethane belt welding is more beautiful and firmly.

Operating Instruction of welding tool kits

1. Pre-heat the soldering iron, cut the belt by the scissors, make sure the transverse incision is flat and smooth.
2. Loosen the four big screws of the welding clamp, adjust the height of aluminum plates to put the belt into it.
3. Put the two ends of belt into the locating slot (If the belt size is small, adjust the four small screw of clamp to fit it.), preset
   protruding length on both ends of the belt, make the two end belt match perfectly.
4. Place the soldering iron between two ends of belt, gently tighten the clamp, make both ends completely touch soldering iron.
5. Heat the soldering iron, when the PU are melted and effluent approximately 0.5~1mm, take out the soldering iron quickly, fasten the welding clamp by the side screw.
6. Natural cooling about 3 minutes, then take off the belt.
7. Grinding the joint smoothly, check both ends of belt are vertical and fix. if not, please repeat the above steps again.

Announcements:

• The welding kit’s small parts may be loose and dusty after long-distance transportation or a certain time of storage, please clean up the surface, check and test it after open the packing.
• When find the belt can’t be welded, check whether the soldering iron is heating first. Otherwise, please change another belt to repeat above operating instruction again.
• Hand will be burned easily by soldering iron if operator is tired and careless during the period of working.
• Check if the voltage and plug of soldering iron are available to use in your side, if not, please change a power supply or contact us in advance.

we have round belt welding kit in stock for fast delivery. If you need welding PVC conveyor belt or PU flat belt, we can also customize it for you.

Please contact us for further need regard Urethane Belt welding Kit.